An air rubber is a portable device that purifies the air. The device operates by sucking in air from one side and passing it through filters and then emitting the clean from the other side. During this process, the filters inside the unit capture tiny airborne particles, such as dust, pollen, and dander. With the help of these units, you can clean your indoor air to prevent a lot of respiratory diseases. If you already have one, we suggest that you follow the tips given below for the best results.
1. Don’t put too much load on the pre-filters
Make sure you change the pre-filter on a regular basis. The unit won’t work properly if the filters are clogged. For proper airflow and long life of the primary filters and the blower motor, the pre-filter should not be overloaded.
It is better that you use high-quality filters in order to reduce air resistance. It can also help prevent the air pressure drop once the filters have exceeded their period of efficiency.
2. Dispose of old filters properly
It is important to dispose of the filters after their expiry. Before you remove the filter from the unit, don’t forget to wear gloves and a face mask. If you don’t be careful enough during the replacement procedure, loose particles fill fly back into the air of your room. So, you should put the expired filters in a sealed bag and then dispose of the bag according to the local regulations.
3. Use activated carbon pre-filters
If you want to avoid unpleasant smells, it is better that you get a unit that comes with activated carbon pre-filters. Unlike common carbon filters, these pre-filters are a lot more porous. Since they feature a larger surface area, they are capable of absorbing a lot of odor.
The porous stuff allows easy passage for air but the surface captures harmful contaminants. The moment these pre-filters get saturated, you may want to replace them as soon as possible.
4. Adjust the airflow rate
If you want to capture most of the dust particles from the air of your room, make sure you set a lower airflow rate. The downside is that a slower airflow rate does not allow a lot of air to pass through the filters. Even if you increase the airflow rate, it won’t necessarily increase the efficiency of the unit. As a matter of fact, an excessively high airflow rate will reduce the efficiency of these devices. Therefore, we suggest that you follow the operating instructions given by the manufacturer.
5. Purify your indoor air 24/7
For proper air purification, experts recommend that the air scrubbers should be kept switched on 24/7 seven. Since these units should be operated at a lower airflow rate for higher efficiency, it is a good idea to keep these devices running even if you are away from your home.
6. HEPA filters
Just because a filter media is HEPA-rated does not mean it can capture 99.97% of tiny airborne particles. The reason is that the size of these particles is over 0.3 micron in real-world conditions. Therefore what you need to do is invest in HEPA-rated filters as they are made from the right type of material.
For efficient filtration, the airflow rate should be 250 m3/hr. If the airflow rate is higher than this, proper filtration cannot be achieved. In other words, a lower airflow rate is recommended if you want to clean your indoor air in an efficient manner.
Long story short, if you want to get the most out of your air scrubber, we suggest that you follow the six tips given above.
Subscribe to the newsletter news
We hate SPAM and promise to keep your email address safe